|
|
 |
|
COPY TURN
Advanced Copying and Turning System for most Woodturning Lathes
Click HERE to view a .wmv video about the Copy Turn - (To Download, Right-Click > Save Target As)
-
Easy and safe to use.
-
Creates accurate copies.
-
Copies any length.
-
Smooth clean cutting.
-
Copies from template or original turned part.
-
Suitable for internal and external free hand turning.
-
Router accessory attachment for decorative pattern work.
-
Suits lathes with centre height of 143mm (5 5/8") to 263mm (10 1/2").
-
Special hollow ground double ended tungsten carbide cutter.
-
Wide range of special accessory cutters and turning aids.
Product
Code
1510000:
$357.
50
5.6 Kg
Standard Copy Turn Kit consisting of the following items.
-
Cast iron Tool Support Base and Control Handle, complete Cutter Holder and Tracer Pin.
-
Two cast iron End Template Supports including three Clamp Screws.
-
Attaching screws and two Clamp Plates for base board.
(Board not supplied)
-
Cutter alignment Setting Plate.
-
Adjusting wrenches.
-
Comprehensive Instruction Manual.
-
Eight minute demonstration VHS video (PAL or NTSC) or DVD.
ROUTER ATTACHMENT
Consisting of the following items.
-
Cast iron Router Clamp Ring and Post.
-
Anodized aluminium Sliding Base Plate and Handle.
-
(Base Plate) Slide Rail - 185mm (7 1/4") side travel including attaching screws.
-
Three Directional Stops.
-
Tracer Pin.
-
Instruction Manual.
IMPORTANT:
The Router Slide Attachment has been designed to use Trimmer Routers with body diameters of 43mm
and 65mm.
TYPICAL ROUTERS
: MAKITA, TORQUATA,
HITACHI, RYOBI, BOSCH ETC
.
Nominate correct Product Code to suit your Router Collar diameter when ordering.
|
Router Collar
Diameter |
Product
Code |
Description |
Price
($AUD) |
Kg |
|
43mm
65mm |
1510025
1510010 |
Suitable for lathes with 143mm ( 5 5/8")
to 165 mm (6 1/2") centre height. |
$214.50 |
2.2 |
|
43mm
65mm |
1510026
1510011 |
Suitable for lathes with 168mm (6 5/8")
to 203mm (8") centre height. |
$214.50 |
2.2 |
|
43mm
65mm |
1510027
1510012 |
Suitable for lathes with 206mm (8 1/8")
to 263mm (10 1/2"). |
$214.50 |
2.2 |
|
|
|
|
|
|
COPY TURN - ACCESSORIES
|
Product
Code |
Description |
Price
($AUD) |
Kg |
|
 |
4001925 |
Standard Cutting Tip |
37.40 |
0.01 |
|
 |
1540017 |
Standard Cutter Holder - less Cutting Tip |
48.40 |
0.1 |
|
 |
1530003 |
Cutter Holder including Round Nose and
Square End Cutter, Left and Right Hand
Side Cutter |
71.23 |
0.12 |
|
 |
1560022 |
Round Nose and Square End Cutter |
25.85 |
0.02 |
|
 |
1560021 |
Left and Right Hand Side Cutter |
25.85 |
0.02 |
|
 |
1530001 |
Straight Scraper |
39.50 |
0.1 |
|
 |
1530002 |
Hooker Scraper
|
39.50 |
0.1 |
|
 |
1560020 |
Scraper Cutter |
25.95 |
0.01 |
|
 |
1560004 |
Sharpening Mandrel for Scraper Cutter |
33.99 |
0.08 |
|
 |
1520003 |
Hollowing Drill |
18.25 |
0.11 |
|
 |
1540004 |
Router - Slide Rail |
20.68 |
0.11 |
|
 |
1530005 |
Router - Direction Stop (Set of 3) |
33.00 |
0.06 |
|
 |
1520002 |
Standard Cutter - Chip Deflector |
8.25 |
0.01 |
|
 |
1520001 |
Quiklink - Multi Profile Template.
16 different designs in one template.
Coffee Table Leg - 450mm (18") long
x
54mm (2 1/8") square (adjustable). |
35.20 |
0.16 |
|
|
|
|
|
|
|
|
